Vogue 1643 Lined Jacket with Faux Leather Bands

My Vogue 1643 fully lined jacket with faux leather contrast bands.
The  pattern is intended to provide us with a replica of a Gucci grosgrain trimmed jacket, but I've never been a huge Gucci fan.  What?!? Yes, it's true. (And I feel as if I shouldn't even admit that to the sewing world.)

However, I did like the shape of the jacket and since the pattern was chosen for the September "Sew Your View" on Instagram I decided to join in on the fun.
The fabric I used was a polyester blend suiting fabric from SR Harris, that had a vague leather look. Since I wasn't going to use ribbon, I decided to make the contrast band in faux leather, and add faux leather piping to further emphasis the band.

Well you know the saying about best-laid plans. Sigh. I underestimated the difficulty of stitching the faux leather piping as well as the faux leather bands. I've worked with faux leather before so I was perplexed as to why I was having trouble this time. I tried my roller foot. I tried stabilizer. I tried tissue paper. Nothing seemed to work.  (I have since purchased a Teflon pressure foot which I've been told will work well on the faux leather next time).

I was frustrated enough to put the entire project aside for two weeks. But I have made a commitment to myself that I will not created any new WIPs (work in progress) so I reluctantly pulled it out and began work once again. 

I'm glad I persevered as I'm pleased with the final jacket. Even with the big boo-boo I made at the very end.
The pattern instructions do not include a few things that I think are key for the structure of this jacket.

I added interfacing to the hem edges of the sleeves and jacket bottom.  I also drafted an upper back interfacing piece, cut it out of a cotton voile scrap, basted it to the neck and armhole edges, and hand stitched it to the shoulder seam.  I also added sleeve heads from flannel fabric. The pattern does call for shoulder pads, which I happened to still have on hand from when they were popular years ago!
The hand stitches attaching the back interfacing piece to the shoulder seam.
The sleeve head, which is needed to help fill out the sleeve cap. I used a cotton flannel I purchased at Hobby Lobby. 
Here's the outside of the shoulder with the additional structure. I will say I did struggle a bit to ease this sleeve into the sleeve cap.  I'm not sure if it is the pattern, or the fabric I used.
The jacket is fully lined, and I wish I had bagged the lining. But instead I followed the pattern instructions which meant quite a bit of hand sewing.  I'm looking at the positive though, as the hand sewing is helping me to continue to improve the muscles and dexterity of my hands and fingers.

The very last step was to stitch the buttonholes. Knowing the difficulty I had with the faux leather earlier in the sewing process I was dreading this step!  I stitched a few test buttonholes and they looked good, so I took a deep breath and stitched the first one on the jacket.

Yes! Success!  Well, kind of.  I didn't notice until I was done that I had marked the bottom buttonhole incorrectly. It is not centered on the faux leather band.  You see, I didn't realize that my faux leather band was actually slighter narrower near the hem.  Because I had stitched the buttonholes from the back side, where the bands were even, I didn't realize the buttonhole was not centered. 

And that is why I will always wear the jacket unbuttoned :-)


By the way, the only way I could get hubby to snap pics for me was to let him take one pic in front of his beloved (and old) Goldwing motorcycle.
Even though I had a little error at the end, I'm pleased with my jacket.  I plan on sewing another. This time the longer view and with ribbon trim!






Comments

  1. I'm not a fan of the Gucci jacket either. But you made a very nice version, boo boo and all!

    ReplyDelete
  2. Mmmmm I don't think that button/buttonhole is noticeable at all. I had to look for it which means only you see it because you made it. Gucci looks are on a case by case basis with me.

    ReplyDelete
  3. I'm glad you went back to it! I know how frustrated you were part way through.

    It looks good! I really love that fabric!!

    I like some Gucci looks and others are a bit too gaudy for me :)

    ReplyDelete
  4. Marilee Judith Gramith12:23 PM

    Your seamstress problem solving skills are extraordinary Sharon! Although I admit to not understanding all of your technical description I greatly appreciate your informed determination to push forward despite the problematic issues. I hope your readers who sew realize how helpful your advice is!
    The jacket is elegant and a longer version would ROCK!!!
    How about a faux suede with a matching faux leather trim and no buttons!

    ReplyDelete

Post a Comment

Popular posts from this blog

Golden goddess gown - a side tie infinity dress that is smokin' hot

Sew a romantic strapless ruffled maxi dress: a tutorial

Tips for sewing itty-bitty (Barbie) doll clothes - Part 2